We have experimented with the Magnetic Power generator idea I had which was not a new idea just a little different than the ones I’ve seen. As of now I only had a little luck with it but not worth going into since it just won’t do the job as it is.

Not that I am giving up on it just yet but I will be working on the next perpetual motion generator on the list for a while. I really believe in free energy and will keep looking. If any of you have found one that really works I would love to here from you. Please feel free to leave a comment.

I was thinking of putting up a video on what I have done so far, maybe some one has an idea that will help me out. It maybe that I need to make this magnetic power generator with more precise measurements for it to work.

Just because I see it doesnt mean I beleave it so here are two free energy video’s that peaked my interest. I’m not sure which one will be next so stay tuned.

As those of you that have been following the Magnetic Power Generator Projects and articles my apologies for the delay. It is sometimes hard to find the time with all the things going on with family and work. The Magniwork project is coming along very slow.

The second Magnetic Power Generator project has made a little more progress. I have the test wheel done and am working on the outer magnet assembly. I used a table saw to make the wheel out of wood. Some of you may already know how this is done and I am thinking of doing a video on how this is done.  I hope to do videos on every step of this project and share it with the readers, that is if it works. I decided to place the magnets at an angle and recess them along the side evenly distributed that ended up taking 16 magnets. I found my drill press was not up to this job and ended up using one at work.

I did do some testing that showed promise but have no firm conclusion at this time. I think that the local store that I got the magnets may think I am a bit magnet crazy, I have purchased all the mag. they had in stock twice and am waiting for another shipment. Hope they come soon it is a little frustrating to have time and not have the things I need to proceed.

Where I am now on this magnetic power generator project  now is working on the magnet mounting brackets. Here will be the part I am having a problem working out. What angle will work? Does it need to be angled? How many magnets will it take and do I need more on one side than the other.

If you are interested Magniwork in the Magnetic Energy Generator (Magnetic Power Generator)

There are many sources of energy to tap for electricity. However, most of these are pretty expensive for an individual to obtain or to maintain. This is the reason why many of us are reliant on the electricity produced by power producers. They are, in turn, victims to the very erratic oil prices which are needed to power their generators. Luckily, there is an alternative that is not only inexpensive but a limitless source of electricity: the magnet power generator.

This electricity source has taken the world by storm in the past couple of months. Although the concept of using magnets to produce electricity is not new, the generator that could produce it economically viable for homes has been recently invented.

The many benefits that one could derive from using a magnet power generator are:

1. It powers itself so you do not have to look for a resource to make it run such as diesel oil, coal, water, sun or wind. This also means that it could provide electricity in perpetuity unless its moving parts broke down.

2. It could work for any home. It could be easily installed and does not require much space.

3. It could help save you 50% in your monthly electric bills. It could be even more depending on how extensively and efficiently you utilize these power generators.

4. Finally, the materials needed to build it are very easy and inexpensive to acquire. There are also a lot of materials that are very easy to follow on how to build one.

A magnet power generator is the answer in these rising prices of fuel and electricity. This doesn’t mean that there is no more need to conserve it. We just need to be more prudent on using it.

Check out  Magniwork here.

Magnetic Drive and Ceiling Fan Generator!

Is this combo a good idea or just one of my hair brain ideas?

As I work though the Magnetic Power Generator project I found myself looking into other alternative energy sources.  Jim and I were out looking for some of the things we needed for the project and talked about the ceiling fan idea I saw on YouTube.

We have talked about a wind turbine made from a ceiling fan and the magnetic drive wheel for the Magnetic Power Generator. The two video’s I have included will give you some idea of what I have in mind. The wheel will be much smaller but as of yet I don’t know just how big a magnetic wheel will have to be  to drive the ceiling fan I have.

If the two can be combined then the Magnetic Power Generator would be complete. But we are still going to build the the original project. This is just one of the alternative energy projects I am thinking of doing. I think when this is all done I may end up with with  Solar Panels, Wind Turbines  and a Magnetic Power Generator. I also have the feeling all this will take much longer than I thought. When you work 6 and 7 day’s a week and around every turn in this project you find you need this and that and to learn things you had not originaly aware you needed to know, well i’m sure you understnd what I mean.

Magnetic Power Generator: Your Ultimate Solution to the Energy Crisis

No one can deny that there is a pending crisis for power. This knowledge led many engineers to make machines that will harness energy from the wind and the sun. However, there are still challenges that exist with these alternative power sources. You cannot harness energy form the sun or the wind if the sun does not shine or the wind does not blow. As a result, there is still a need for another means of generating power without having to rely on these two types of energy sources. Right now, the most effective solution is the magnetic power generator.

This works without having to depend on the sun, water, or the wind. The source of energy for a magnetic power generator is a magnet. There are three magnets placed in the motor, two of which have extreme polarities and the other one balances the force field created by the opposing magnetic poles. The motor converts this force field into energy that you can use to power things that need electricity.

If you have a magnetic power generator, you will no longer depend on power corporations for electricity. You will not experience power outages and this is one of the best things that could ever happen especially if you have a business. If you rely on power corporations, you are likely to get really mad if the power outages happen frequently.

Another benefit of this machine is that it needs very low maintenance and it does not emit any fumes that can harm the environment. A magnetic power generator will also help you save tremendous amount of money. On top of this, this machine can give you 7,000 watts of power everyday and you do not have to worry about electricity anymore. To get started, buy the manual now and start building your own machine. If you do not want to build your own, then you simply buy some that is already built and start using it.

Magnetic Power Generator update.

I just wanted to update the readers of Gizmo and Gadget News about our progress on the Magnetic Power Generator. Jim ordered the plans last week and got them online within minutes. He got them at Magniworks and paid $49.00. We have now both gone over the plans and think this might just be doable. We discussed a couple of opinions we could take on this project one of which was to buy new what we needed and the second was to salvage ( scrounge )what we could wherever we could. We both agreed it was part of the fun to salvage anything possible and at the same time save some hard earned cash. With the economy the way it is we also thought it might help some of you to be able to afford this project for yourselves.

Our first salvage will be the aluminium plate sense we already have the wire that the Magnetic  Power Generator requires. Its always nice to save some cash right out of the starting gate. I know the fact that we won’t be salvaging the wire will not help you and you may end up buying the wire new. If we come up with ideas on places to scrounge up so wire I will ad it to a later posting. Perhaps some of the readers will have ideas on that topic and comment on this in the comment area of this posting. Heck for that matter if you have any comment please feel free to share them with the rest of us.

Here is something I would like to let everyone know. Jim and I both are doing this for several reasons one is to become more self sufficient. We doth would like our homes to be totally off the grid and completely self sufficient. This Magnetic  Power Generator ( alternative energy ) project is just the first we will be doing over the next  year or two.

We are not doing this to go green, at least not in the since that many use the term. Many people are going green as a political statement as in P.C.          ( politically correct ). I don’t like P.C. it seems as though it being used against our right to free speech. If we were to look at this   Magnetic  Power Generator ( alternative energy ) as a political statement it would be to tell the politicians to take a flying leap. Just think of how much power we could take away from the self righteous, self serving,  power hunger politicians if enough  of us became self sufficient in the energy department.

This Magnetic Power Generator project  may take me to a greener place but not because I’m a tree huger.

Check out  here Magniworks